Kodning af alarm med OBDeleven

Besvar
CrAzY-HoRsE
Helt nyt medlem
Indlæg: 63
Tilmeldt: 13. feb 2017, 15:56
Geografisk region: København
VCDS ejer: Nej
Has thanked: 0
Been thanked: 3 times

Kodning af alarm med OBDeleven

Indlæg af CrAzY-HoRsE » 22. jan 2018, 12:53

Hej,

Efter at have fedtet lidt rundt med at kode alarm så lykkedes det endelig og syntes lige jeg ville dele med jer. Det burde virke på alle MQB biler. Har testet på Leon 5F og Golf mk7.5

How to code alarm.

Suitable for all vehicles without standard alarm, no requirements needed. It only monitors doors, bonnet and trunk.

Go to Module 9 - Electronic control unit.
Enter Security Code (31347)
Go to long coding and switch view to Bits
Go to byte 12 and choose "Anti-theft system installed" Or Activate Bit 0
Go back to module 9 and go to Adaptation
Go to Submenu - Anti-theft device
Under "DWA Alarmverzoegerung" Change value to "door contact thatcham driver"
Under "DWA Camper Modus" Change value to "active"
Under "Ueberwachung Innenentriegelungshelbel" Change value to "activated"
Under "Akustischer Alarm Signalhorn" Change value to "enabled"
Now go back and go to Submenu - "Acknowledgement Signals"
Under "Akustische Rueckmeldung global" Change value to "enabled"
Under "Akustische Rueckmeldung Signalhorn" Change value to "activated" (Might already been activated)

How to Test:

Lock the car while inside, and after about 30 seconds open the door and the alarm should go off, Press "Open" on remote to deactivate.

Larmer helt fantastisk da den bruger hornet, og ikke den der fesne EU støjkravsunderlagte sirene man får med når man køber den store alarmpakke.

Besvar

Tilbage til "Kodning af styreenheder/ekstraudstyr"