Blackfinger skrev:Må vi se billeder af begge sider af kablet?
Så er jeg tilbage efter ferie og må sige at du har meget lidt tiltro til dine medmennesker.
Mit kabel er originalt og bruger ross tech's sofware med licens.. pris for mig er 2351,- inkl. levering.
Spec for kablet ser sådan ud.
Professional VCDS® diagnostic tool (EOBD/OBD/OBD2) and KPower dynotest tool with additional CAN bus support for USB connection. VCDS supports Audi, Seat, Skoda, VW and Bentley (all VAG cars) plus a generic OBD2 mode for other cars manufacturers.
This OBD scanner system supports KKL for all previous vehicle models and is additionally compatible to the new ECUs in actual Audi A5, A7 & A8, Audi A6, Golf 7 etc... that use CAN bus (also UDS/ODX) for diagnostics. All ECUs in Audi, Seat, Skoda and VW vehicles are supported plus the engine ECU of other OBD2 compatible cars!
Original Ross-Tech® HEX-USB+CAN diagnostic hardware for USB, inclusive english and german full-versions of the diagnostic software VCDS® (VAG-COM) for download.
Because of the built-in license key (VCDS full version), always the newest version of VCDS can be used, use software updates (free of charge) immediately without waiting on registration issues. As our customer, you will be automatically notified of new software versions.
The diagnostic system includes access to the Dieselschrauber-Community, where competent professionals help you with advice and action. Extensive fault databases, work instructions and guidance complete the support.
Our professional tool is designed for daily hard garage usage, where best-available function and future safety is important.
With our tool you can...
read control unit information (e.g. VAG part numbers, codings and software versions),
read and erase diagnostic trouble codes (DTC, fault codes),
check control unit selftest (readiness),
login into control unit(i.e. to activate cruise control),
change control unit coding (coding help / LCode coding assistant),
log data (measuring blocks),
view measuring graphs from logged data,
realtime measuring graphs,
Decoding of all DTCs to error describing texts,
view all measuring blocks,
enable basic settings mode (e.g. key matching, reset service light),
control unit adaption,
support 7-digit PINs,
supports VAG KWP 1281 (K/L-Line), KWP 2000 (K-Line), KWP 6000 (CAN) and KWP 7000 (UDS),
full automatic "VAS-6017" K1 / K2 function, that means full support of AUDI >= 2001 models with additional K-Line (K2). No further expensive K1/K2 switch necessary!
Fast data logging with Bosch EDC16, EDC17 and ME7, MED17 ECUs (>30 Samples/s).
OBD2 protocol over ISO9141-2 and ISO14230 for many other car manufacturers, e.g. Opel, BMW, Mercedes Benz, Honda, Kia, Mazda, Mitsubishi, Smart, Subaru, Suzuki, Toyota, Peugeot, Renault, Volvo etc. Usable for exhaust service.
MOST bus diagnostics.
Service interval reset assistant.
Battery coding assistant.
Power measurement via KPower. If you want to know horsepower and torque of your engine, just use the KPower dyno application.Only at us!
KDataScope VCDS logfile analyzer.Only at us!
Read out EDC15 and EDC16 engine ECU mileage. Do you know the true milage of your car?
Prisen er baseret på at det er en registreret import virksomhed, købes der som privat person bliver pakken fortoldet i CPH og der kommer en del ekstra udgifter på.
Men tjek ud på
http://shop.dieselschrauber.de/vcds-obd ... 6-l-en.php der er prisen på kablet 310 euro x 7,47 dk (kursen) plus 5 euro i fragt